7
2. Attach the Front Stabilizer
Be sure to fit the parts in the
same order as the diagrams
shown.
!
Make sure the bolts are fully
tightened with the allen key.
!
Make sure the moving wheels
on the front stabilizer face out
after assembly.
!
2-1. Remove the cardboard tube from the front end stabilizer bracket
Loosen the
r
two M8 x 16mm Allen Head Bolts
from the cardboard tube
and remove the cardboard tube.
The two Allen Head Bolts and the cardboard tube
r
are used for packaging protection purpose,
which won’t be used again during the assembly.
2-2 Attach the front Stabilizer
Remove the
r
four M8 x 16mm Hex Socket Head Bolt
&
M8 x 19mm x1.5mm Curve
Washer
from the
Front Stabilizer (B)
with the 6mm Allen Key provided as shown.
Attach the
r
Front Stabilizer (B)
to the
Main Frame (A)
with
four M8 x 16mm Hex
Socket Head Bolt (B5)
&
M8 x 19mm x1.5mm Curve Washer (B6)
then tighten
these bolts with the 6mm Allen Key provided securely.
FIXINGS:
FIXINGS:
x
4
FIXINGS:
TOOLS:
Part
No.
B5
x
4
Part
No.
B6
FIXINGS:
FIXINGS:
x
2
FIXINGS:
TOOLS:
Cardboard
Tube
LUBRICATE BEFORE ASSEMBLY
cascadehealthandfitness.com
H E A L T H & F I T N E S S
R
Summary of Contents for AIR ROWER UNLIMITED MAG.
Page 28: ...Exploded Diagram 28 cascadehealthandfitness com...
Page 31: ......
Page 32: ...H E A L T H F I T N E S S R...
