1
6033701-R9 EN
RECOMMENDED HYDRAULIC SUPPLY
GA0033.eps
G-Series Non-Revolving Sliding Arm Clamps provide
the best performance with one of the hydraulic supply
arrangements shown below. Refer to Cascade
Hose &
Cable Reel Selection Guide
, Part No. 212199, to select the
correct hose reel for the mast and truck. The hose and
fitting requirements are:
• All hoses and fittings for CLAMP (or FORK POSITION)
and SIDESHIFT functions should be at least M8 with a
minimum internal diameter of 7 mm.
Non-Sideshifting
A or B
RH or LH THINLINE™ 2-port hose reel group.
OR
C
Mast single internal hose reeving group.
Sideshifting
A and B
RH and LH THINLINE
™
2-port hose reel groups.
OR
C
Mast double internal hose reeving group.
Sideshifting with Solenoid
A
6-N-1 cable/hose reel group.
OR
A and C
Cable reel and single internal hose reeving group.
Independent Arm/Fork Control
A and B
RH and LH THINLINE
™
2-port hose reel groups.
OR
C
Mast double internal hose reeving group.
B
A
C