7
M
M
M
M
M
IDDLE
IDDLE
IDDLE
IDDLE
IDDLEB
B
B
B
BUR
UR
UR
UR
URY
Y
Y
Y
Y
™
™
™
™
™
BLADE INSTALLATION
Blade Irons (5)
Blades (5)
Pack C:
Blade Screws (21)
Pack D:
Blade Iron Screws (11)
BLADE HARDWARE
(not to scale)
Attach Blade Irons
Step 6.
Attach blade to bladeholder by first pressing the
blade badge into the blade, then installing the bladeholder
using four blade screws provided in Pack C. Using the
provided screwdriver, tighten securely
by hand only.
Repeat for each blade assembly.
Blade Installation
Step 7a.
Remove the blade access plate and screws as
shown. Do not discard the two screws. They will be used
to reinstall the plate later.
Step 7b.
Attach the blade/bladeholder assembly to the
motor by using two bladeholder screws from Pack D for
each blade. Use the opening created by removing the blade
access plate to align the holes in the bladeholder with the
holes in the motor. Install the screws one by one using
the provided screwdriver. Tighten securely
by hand only
.
Repeat for each blade/bladeholder assembly.
Step 7c
Re-install the access plate.
TIP: For balancing purposes, loosely install all five blades
to the motor before tightening the blade screws securely.
CAUTION:
Blade screws must be tightened securely before
operating the fan.
Blade Medallions (5)
