18
INSTALLATION WITHOUT OPTIONAL LIGHT KIT
Figure #2
Pull-chain switches on the fan control the fan and lights.
Using the fan control pull-chain switch: Fan off
at start.
First pull:
fan ON, High speed
Second pull:
Medium speed
Third pull:
Medium Low speed
Fourth pull:
Low speed
Fifth pull:
Fan OFF
The sequence of Light pull chain as follows:
Light off at Start
Direction of blade rotation is controlled by the reverse
pull chain on the side of the switch housing. No changes
in household wiring are required.
4 - SPEED OPERATION
OPTIONAL LIGHT PULL
CHAIN SWITCH
REVERSE PULL CHAIN
SWITCH
OPTIONAL
LIGHT PULL
CHAIN
Step 14a.
Tuck all wires into the switch housing.
Figure #1.
Step 14b
. Find the keyed slots on the switch housing,
and the notches on the adapter plate. Line these up
and assemble the adapter plate to the switch housing
with the 4 adapter plate screws. Figure #1.
Step 14c.
Place the cover plate cap onto the adapter
plate and secure using the Cover Plate screw. Figure
#2
Step 14d.
Line up the notches on the cover plate
screw to the slots in the Cover Plate Cap and snap
into place. Figure #2.
Figure #1
