35 of 63
CFW-2132 – User Guide
UG01228 v1.0 April 27, 2020
© Casa Systems 2020
Operator settings
The
Operator settings
page enables you to select which frequency band you will use for your connection
and enables you to scan for available network operators in your area.
You may want to do this if you’re using the antenna in a country with multiple frequency networks that may
not all support LTE. You can select the antenna to only connect on the network frequencies that suit your
requirements.
Operator settings
The operator settings feature allows you to select whether to allow the antenna to automatically select a
network or to manually scan for a network to which the antenna is locked.
Figure 34 - Operator settings
To scan for available networks, set the
Select operator mode
from
Automatic
to
Manual
then click the
Scan
button. This operation can take a few minutes and requires that the packet data session be
disconnected prior to scanning.
