33 of 63
CFW-2132 – User Guide
UG01228 v1.0 April 27, 2020
© Casa Systems 2020
and received to inform remote computers on the internet that packets originating from a machine
behind the antenna actually originated from the WAN IP address of the antenna’s internal NAT IP
address. This may be disabled if a framed route configuration is required and local devices require
WAN IP addresses.
11
Click the
Save
button when you have finished entering the profile details.
Confirming a successful connection
After configuring the packet data session, and ensuring that it is enabled, click on the Status menu item at
the top of the page to return to the
Status
page.
When there is a mobile broadband connection, the
WWAN connection status
section is expanded showing
the details of the connection and the
Status
field displays
Connected
. To see details on the connected
session, you can click the
Show data usage
button.
Figure 31 - WWAN connection status section
Checking data usage
In the
WWAN connection status
section of the
Status
page, each packet data connection profile has a
Show data usage
button which displays the amount of data received, sent and a total data usage figure.
To show the data use for a connected profile, click the
Show data usage
button.
The data usage for the last 10 sessions is displayed in addition to the current session and the button name
will change to
Hide data usage
.
