CAS RW-10Z, Owner'S Manual

Page: 13 / 34

14
5. Menu
It is possible to perform setting without the manual by using the LEVEL1, LEVEL2, LEVEL3
keys and direction key.
Turn the power on for the Indicator. Press the LEVEL1 key for more than 1 second to move
to the Main Menu. Main Menu is composed of TEST mode, SET mode and CAL mode.
CAL mode will not be activated.
Initial display is the TEST mode. Whenever the LEVEL1 key is pressed, it moves in the
sequence of TEST
Î SET Î CAL Î …. When the LEVEL1 key is pressed for more than 1
second again, then it will enter the Measurement mode.
TEST
When the LEVEL2 key is pressed under TEST mode in the Main Menu, you will move to
the Sub-Menu of TEST mode.
Sub-Menu of the TEST mode is composed of KEY, DISPLAY, BATTERY, LOADCEL,
TIME and PRINT. Functions include key-test, LCD and LED test, verification of remaining
power of battery, AD value of PAD, verification of current time, and verification of operation of
built-in printer.
Whenever the LEVEL2 key is pressed, the sub-menu of the TEST mode moves in the
sequence of KEY
Î DISPLAY Î BATTERY Î LOADCEL Î TIME Î PRINT Î Comm.
Main
Menu
Sub-Menu Function
KEY Verify operation of KEY
DIsPLy Verify operation of LCD and LED
bAtEry Verify remaining power in Battery
LoAdCL Verify AD value for each Pad
tiME Verify current time
Prt Verify operation of printer
TEST
CoMM Verify state of communication
TEST – KEY
With the TEST mode displayed, press the LEVEL2 key until KEY is displayed.
Press LEVEL3 key to enter the KEY mode, then the word ‘input’ will be displayed and when
you press the desired key, then the pressed key will be displayed. When SET key is
pressed, SET key is displayed and will exit the mode after 1 second.
Once you exited, if you wish to move to other Sub-Menu of the TEST mode, continue to
press the LEVEL2 key and press LEVEL1 key to enter the Main Menu and press the
LEVEL1 key for more than 1 second in order to enter the MEASUREMENT mode.