CAS RW-10Z, Owner'S Manual

Page: 10 / 34

11
Keyboard
ZERO
Short
Turns the weight indication around Zero Point to 0.
(Operates up to 2% of the maximum weight)
PAD
Short
When the PAD is pressed and desired PAD No. pressed, then it will
display only the weight on the corresponding PAD only.
Support display will indicate the No. of the current PAD.
If you wish to find out the weight of other PAD, press the PAD key
again and press the corresponding No. of PAD.
It will not operate if number other than the number of PADs currently
connected.
To display the overall weight again, press the SUM key.
Print function and FIND function does not operate in this mode.
TRUCK No.
Short
Enter the vehicle number after having pressed the TRUCK NO key.
You can print for each axle by pressing the PRINT key after having
entered the vehicle number.
PRINT
Short
You can start printing with PRINT KEY without using the TRUCK NO
key. When printing with the PRINT KEY, the vehicle number will not be
outputted.
Every time the PRINT key is pressed, the weight of the axle will be
printed.
Once it reaches the maximum number of axles (5 axles), overall
weight will be printed automatically, and whether to save the data will
be determined in accordance with the automatic saving option. (Same
as when the SUM key is pressed.)
SUM
Short
Use after having printed all the axles with the PRINT key.
Measured weights of axles will be summed and printed, and
terminates the operation of printer.
Whether to save the data will be determined in accordance with the
automatic saving option.
Long
Transfers to the overall weight measurement state from individual
weight measurement state.