CAS CAS-X320, Reference Manual, Page: 18 / 64

Reference Manual V1.10 Software Versions 3.xx
X300-621-110
Page 17
4.
Data Entry
Throughout the setup and normal weighing mode, different data entry methods are used. Each
method is described below.
When using the keypad for normal operation, press the key on keypad to initiate the feature.
4.1. Editing Annunciators
When in Setup the instrument displays Editing Annunciators. Figure 14 identifies each of the
editing annunciators. When in Setup, press the corresponding keypad key below the
annunciator.
Figure 14: Editing Annunciators
Editing
Annunciator
Key Name Description
GRP ZERO Steps through the list of Groups.
ITM TARE Steps through the list of Items.
Press this key to accept changes and return to the
menus.
(Also refer to the OK description below.)
SEL GROSS/NET Moves the editing cursor in some editing modes.
EDT PRINT Steps through the available options when editing a
particular item.
OK OK
(FUNCTION) Press this key to accept changes and return to the
menus.
(Also refer to the ITM description above.)