CARVIN SANICLEAR40 Operation And Installation Manual Download Page 22

22 

M10077EN 

 

CARVIN POOL EQUIPMENT INC 

 

LIMITED WARRANTY 

 

 

Carvin Equipment Inc. ("Carvin") warrants "Carvin" pool products to be free of defects in material and 
workmanship for a period of 24 months from the date of purchase with the following exceptions: 

 

Light Bulbs: Full Moon Watercolor LED light bulbs are warranted for 12 months from the date of purchase; 
incandescent bulbs are warranted for 90 days from the date of purchase. 
Misc: Filter elements, DE grids, white-goods, strainer baskets, strainer basket "flap" and "priming tube", 
pressure gauges, square rings, o-rings, gaskets, and all replacement parts are warranted for 12 months from 
the date of purchase. 
Chlorine Generation System: Salt Chlorine generation systems are covered by a limited warranty of 24 
months; 100% during the first year, 50% during the second year from the date of purchase. 

 
 

 

CONDITION IN ORDER TO EXERCISE THE WARRANTY: 

In order to activate this 24 months warranty, "Carvin" products must be registered with "Carvin" by the 
following method: 
Mail-in the Warranty Registration Card. 
Online at www.carvinpool.com 

 

All defects must be denounced to “Carvin” or to their representative within 72 hours in order to avoid the 
spreading to other equipment, failing which; the present warranty will not be honoured. This warranty is non- 
transferable and extends only to the original retail buyer and only during the time in which the original retail 
buyer occupies the site where the product was originally installed. "Carvin" warranty obligation with regard 
to equipment which it does no itself manufacture is limited to the warranty actually extended to "Carvin" by 
its suppliers (i.e. motors). 

 

This warranty applies to products used in swimming pools, Hot tubs, & aquaculture applications only and 
does not apply to any product which has been subjected to negligence, alteration, accident, abuse, misuse, 
improper installation, abrasives, corrosion, improper voltage supply, vandalism, civil disturbances, or acts of 
God (including but not limited to damage caused by freezing, lightning strikes, and other damage caused by 
catastrophic events). The only warranties authorized by "Carvin" are those set forth herein. "Carvin" does not 
authorize other persons to extend any warranties with respect to its products, nor will "Carvin" assume 
liability for any unauthorized warranties made in connection with the sale of its products. "Carvin" will not be 
responsible for any statements that are made or published, written or oral, which are misleading or 
inconsistent with the facts as published in the literature or specifications furnished by "Carvin

"

Summary of Contents for SANICLEAR40

























Reviews: