Cartoni Malibu 540 2014, Manual

Page: 70 / 136

110-0001-04EN
56
7
Electrical system
7.2 230 V on-board electrical system
1
2
10800014
1 Test button
2
FI circuit breaker
Fig. 41 Circuit breaker
→ Check the correct operation of the FI circuit breaker(Fig. 41, Pos. 2)
monthly. For this purpose, press the test button (Fig. 41, Pos. 1).
The FI circuit breaker (Fig. 41, Pos. 2) must switch off immediately. Ob -
serve additional information on the device!
→ Electrical consumers that are connected to the 12 V wiring system of the
living area are supplied with voltage from the living area battery.
→ When the external 230 V supply is connected, the living area battery is
automatically charged via the charge module in the electric block.
→ To preserve the living area battery, connect the Malibu box-type van to an
external 230 V supply as often as possible.
→ Move the switch position of the FI circuit breaker to "1" (top) for the 230 V
operation (Fig. 41, Pos. 2).
7.2.1 230 V connection
→ The external 230 V supply must be safeguarded via a residual current
circuit breaker (FI switch, 30 mA).
→ Unwind the cable completely from the cable reel in order to avoid overheat-
ing.
The Malibu box-type van can be connected to an external 230 V power sup-
ply. The cable must have a maximum length of 25 metres.
Supply line:
• three-wire (3 x 2,5 mm
2
) flexible rubber sheathed cable
• maximum 25 metres long
• 1 connector with ground contact
• 1 connection coupling with ground contact
(Connector system according to DIN 49462)