Cartoni Malibu 540 2014 Manual Download

Page: 42 / 136

110-0001-04EN

While driving

4.7

ISOFIX child seat

Damage to the child seat!

If a child seat with the Top Tether system is fitted or removed, the seat may

be damaged.

→ When fitting or removing the child seat with the Top Tether system, observe

the instructions of the child seat manufacturer!

→

Use the child seat with the Top Tether system only on seats with retaining

eyes!

→

Approved sitting positions for the ISOFIX child seat are marked by a sewn

label.

→

You can obtain further information in the separate operating instructions

from the seat manufacturer.

Group

Damage to the

child seat!

Seats

Passenger seat

Back, opposite

direction of travel

Back, in the

direction of travel

up to 10 kg

up to 13 kg

9-18 kg

IUF

15-25 kg

IUF

22-36 kg

IUF

IUF:

Also suitable for ISOFIX universal restrain systems facing the front that are approved

for use in the specified weight class.

ISOFIX connecting point that are not suitable for this weight class and / or size class.

Tab. 3

Child seat fastening ISOFIX child seat

Summary of Contents for Malibu 540 2014









































































































































Search results

Summary of Contents for Malibu 540 2014

Reviews:

Related manuals for Malibu 540 2014

Brands by name

Popular brands

Cartoni Malibu 540 2014, Manual

Search results

Summary of Contents for Malibu 540 2014

Reviews:

Related manuals for Malibu 540 2014

Brands by name

Popular brands