Cartoni Malibu 540 2014, Manual

Page: 57 / 136

6
43
110-0001-04EN
Living
2. Remove the bottom leg part (Fig. 18, Pos. 2).
3. Hold the table plate (Fig. 18, Pos. 1) with both hands, and remove from
the hanging rail (Fig. 18, Pos. 3)..
Caution: The table plate (
Fig. 18, Pos.
1) is only hung on and may
fall
down
if lifted too high.
→ Stow the table plate and leg part and secure against slipping.
Moving the table:
1. Lift the table (Fig. 18, Pos. 1) slightly in order to release the toothing.
Caution: The bottom leg part (Fig. 18, Pos.2) is only inserted and may fall
out.
2. When the table (Fig. 18, Pos. 1) is in the raised position, swivel into the
desired position.
3. Put the table (Fig. 18, Pos. 1) back down and make sure that the teeth
engage.
6.5.3 Using the table as an outer table
→ Do not close sliding door with table hooked on.
→ Stow the table plate and leg part and secure against slipping.
Hooking on the outer table:
1. Hook table (Fig. 19, Pos. 1) at an angle from above into the guide rail
(Fig. 19, Pos. 2) at the kitchen block (Fig. 19, Pos. 3).
Caution: The bottom leg part (Fig. 19, Pos.4) is only inserted and may fall
out.
2. Returning to the original state is carried out in reverse order.
10800225
2
1
4
3
Fig. 19 Hook on outer table