Cartoni Malibu 540 2014 Manual Download Page 37

Page: 37 / 136

110-0001-04EN

While driving

Wearing your seat belt correctly for pregnant persons

Risk of injury!

If the seat belt is guided over the persons stomach during a pregnancy, this

can lead to injury to the mother and unborn child in event of an emergency

braking action or collision.

→ For pregnant women, the seat belt should be positioned very low so that it

runs over the pelvis and under the stomach!

10800003

Fig. 3

Putting on the seat belt

Putting on the seat belt:

Pull the seat belt on the belt tongue (Fig. 3, Pos. 2) out of the roller unit

across your shoulder.

2. Guide the seat belt diagonally over your upper body.
3. Guide the lower belt part over your hips (

not

over the stomach).

Insert the belt tongue (Fig. 3, Pos. 2) into the clip (Fig. 3, Pos. 1) until

you hear it clicking.

Summary of Contents for Malibu 540 2014









































































































































Search results

Summary of Contents for Malibu 540 2014

Reviews:

Brands by name

Popular brands

Cartoni Malibu 540 2014, Manual

Search results

Summary of Contents for Malibu 540 2014

Reviews:

Brands by name

Popular brands