Cartoni Malibu 540 2014 Manual Download

Page: 32 / 136

110-0001-04EN

Before starting to travel

3.4

Electrically operated entrance step

→ Before driving off each time and after short breaks, make sure that the

entrance step has been fully retracted.

→

Do not stand in the immediate movement area of the entrance step when

it is being extracted or retracted.

→

Do not load the entrance step when extracting or retracting.

→

The living area battery must be connected and ready for operation for

operating the entrance step.

→

The switch for operating the entrance step is located in the entrance area.

→

An acoustic signal sounds when the entrance step has not been retracted

and engaged correctly.

Fig. 1

Single step entrance step

Move the entrance step out:

•

press rocker switch (Fig. 1, Pos. 2), the entrance step extracts completely.

Move the entrance step in:

•

press rocker switch (Fig. 1, Pos. 1), the entrance step retracts completely.

Summary of Contents for Malibu 540 2014









































































































































Search results

Summary of Contents for Malibu 540 2014

Reviews:

Related manuals for Malibu 540 2014

Brands by name

Popular brands

Cartoni Malibu 540 2014, Manual

Search results

Summary of Contents for Malibu 540 2014

Reviews:

Related manuals for Malibu 540 2014

Brands by name

Popular brands