Installation and operation
Installation, Operation & Maintenance of the Wireless Sensing Family
19
Figure 10: Typical equipment allocation in a warehouse
3.3.4
U-Sensor Gateway setup
For setup of the USG, follow the steps below (see Figure 8 and Figure 9):
All dip-switches (8) should be in “off” position (all in down position)
Connect
UHF Antenna
to UHF Antenna connector (1) on the front
panel
In case of a GPRS USG (either with GPS or without);
Open the
SIM card compartment
(9) by pushing the
button
(10) using a thin screwdriver
Insert the
SIM card
into the compartment. The dedicated
Location fits the SIM card shape.
Push back the SIM card compartment. Make sure it is well
inserted.
Resident
Sensor
U- Sensor
USG
