Carson Nitrobone Automatic, Instruction Manual

Page: 6 / 104

CARSON Automatic RTR: Nitrobone 50 010 3021 Stormracer 50 010 3022 6
GB
Tools Needed for the Assembly
Scissors 50 001 3305 Needle nose pliers 50 007 4034
Side cutter 50 007 4035
Modelling knife 50 007 4053
Hexagonal wrench 50 001 3118 Philips screwdriver
(small and big)
1,5/ 2 / 2,5 mm
50 007 4023
Instant adhesive 50 005 3339
Please read the instructions provided with your radio system
before using it.
The servos must be set at the centre position before
installation. To set the servos at a neutral position, turn on
the transmitter and receiver. Set the trim levers in the centre
position and turn off the receiver, and then the transmitter. The
servos will be in proper neutral position for installation.
Receiver antenna
Batteries for receiver
Engine
throttle
servo
Steering servo
Switch
Transmitter
Your 3 Channel Radio System
Tweezers 50 007 4003