39
CARSON DRAGSTER Brushless-Regler
GB
9. Selecting Forward – Brake – Backwards
“Training”/Forward – Brake “Racing Mode”
Flashing
frequency
1
2
Direction of travel
only forwards
“Racing mode”
Forwards and backwards
“Training journey”
•
Press the SET button down until the blue LED light up two times. Release the
SET button again.
•
The red LED starts flashing. This shows that you are in the mode for setting the
direction of travel.
•
Press the SET button again briefly. This brings you to the next setting.
The red LED flashes at the next highest speed.
•
By repeatedly pressing briefly on the SET button you can scroll through the
settings.
•
When you reach the required setting, hold down the SET button for approx. 2
seconds; the setting is stored.
•
Once you have stored the setting, the red and blue LEDs flashes alternate
to show that you are leaving the programming mode. The controller is ready
for operation again. Switch controller off and on again to activate the selected
settings.
•
If you do not press the SET button for more than 10 seconds the
controller reverts to the last setting and is ready for use again.
Blue LED
Red LED
