37
CARSON DRAGSTER Brushless-Regler
GB
The speed controller can be operated immediately after it has been synchronized
with the transmitter. However, specific parameters can be adjusted to suit
particular conditions.
The controller is programmed using the SET button. When you press the button
down, different LEDs and combinations of LEDs flash one after the other. Each
LED combination represents a particular menu which can be selected and set by
releasing the SET button at the required combination.
The following parameters may be selected:
•
Battery type (NiCd/NiMH, LiPo), Cut-Off
•
Training journey/racing mode
•
Initial braking action 0 % - 70 %
•
Percentage drag brake when the throttle/braking lever is in neutral
0 % - 45 %
•
Dead band Level 1 – 5
•
Driver profile 1 - 5: Select from four pre-programmed settings for
throttle/brake.
Profile 5 resets the speed controller to the factory defaults.
You have various tuning options within the individual menu items. These are
distinguished by the flashing frequency of the LEDs, and are selected by pressing
the SET button.
These are distinguished by the flashing frequency of individual LEDs, and are
selected by releasing or pressing the SET button at the corresponding time. The
flashing frequency of blue LED indicates the current selected menu item (e.g.
battery type, initial brake, etc.). The flashing frequency of red LED indicates the
current selected setting (e.g. 10 %, 20 %, 30 %, etc.).
When you select the menu item, the LED flashes/LEDs flash in the
frequency of the previously selected option.
7. Setting the Parameters by Means of the Speed
Controller Setup Button
