Programming specific applications
ZS Sensor
CARRIER CORPORATION ©2020
Applications Guide
All rights reserved
25
When a user presses the
button, the screen initially shows the current zone HVAC mode. With each press of
the button, the display shows one of the following options:
Auto
The control program determines the mode.
Heating only
Cooling only
Fan only
ZS Pro: To program manual HVAC control (fan only, cooling only, or heating only) using the or
button
1
From the
Sys In
microblock menu, add a
BACnet Multi-State Value Parameter
microblock.
2
On the Property Editor's
Rnet
tab, check
Enable Rnet
.
3
Select the
Zone Mode Request (601)
from the
Rnet Tag
drop-down list.
4
Check
Editable
.
5
Select
Show on
the
Information Screen
or
Diagnostics Screen
.
6
On the
Properties
tab in the
Rnet Text
fields, type the text that you want a sensor to show for each mode.
NOTES
○
The letters K, M, Q, W, X do not display on a screen.
○
If you do not enter text, the sensor will show the Value number for the mode.
When a user goes to the information screen, it will initially show the current mode. The user taps the or
button to cycle through the mode options.
Summary of Contents for ZS
Page 4: ......
Page 48: ......
Page 49: ...CARRIER CORPORATION 2020 Catalog No 11 808 504 01 6 11 2020 ...