Carrier XtendFRESH, Operation, Service And Parts Manual

Page: 26 / 72

T-366 6–2
Figure 6.1 XtendFRESH Panel
2. Loosen two #10-32 nuts that secure the brackets holding the air filter in place.
3. Slide the panel air filter(s) out ( Figure 6.2 ).
Figure 6.2 Panel Air Filter(s)
6.2.2 Replacing the Panel Air Filter(s)
1. Install the panel air filter by reversing the above steps. Be sure the filter is fully inserted until it hits the stop.
Also be sure to install the filters in the correct air flow direction. The filter’s wire mesh must be facing towards
the inside of the container.
Louvered
Panels