![background image](http://html.mh-extra.com/html/carrier/xct-series/xct-series_installation-and-owners-manual_2560362017.webp)
• The condensate drainage pipe should be over 1% gradient. And it should be wrapped with heat insulation pipe.
Choice of Blowing Wind from Blower (when using the high performance filter)
The blower is provided with a red terminal and a white terminal. The standard wind choice has been set before
delivery. When the use of optional components, such as the high performance filter, causes the static pressure rising,
change the connection of the connector mounted on the side of the control cabinet, as shown below.
Cautions:
The indoor units of this series are low pressure duct type. Please contact the professional design and
after-sales service people for the following items: calculate the heat load and the external static pressure, choose the
correct return outlet, air return pipe , air discharging outlet and air discharging pipe.
wall
top side
no less
than
150mm
no less
than
150mm
no less than 1750mm
front
no less than
1000mm
ground
air outlet
air return
air outlet
air outlet
check hole
no less than 150mm
no less than 150mm
air return
standard blowing wind (at delivery)
high-speed blowing wind
one side
of blower
one side of
control
cabinet
Yellow
Black
Blue
Red
Yellow
Orange
Black
Blue
connector white
white
one side
of blower
one side of
control
cabinet
Yellow
Black
Blue
Red
Yellow
Black
Blue
Red
connector white
red
Static Pressure Range
unit: Pa
Standard
Static
Pressure
Max.
Static
Pressure
0
30
Installation Procedures
9
check hole
Summary of Contents for XCT Series
