2. DISPLAY AND BUTTONS
04
03
MODEL:
RG10A2(U2S)/BGEF
RG10A10(U2S)/BGEF(20-28 C/68-82 F)
2.1 DISPLAY
2.2 BUTTONS
On/Off
Press to start operation.
Press again to stop.
Mode
Press the mode button to
switch the mode in turn.
ECO Gear
Breeze Away
Press to avoid the direct air flow
blowing on the body.
LED
LOCK
Fan Speed
Press to select the desired fan speed.
Temperature UP
Increases temperature in
1 C /1 F increments.
Max. Temp. is 30 C/86 F .
Press to turn on/off the LED
display. Pressing 5 more
seconds to alternate the indoor
display between setting
temperature and room
temperature(Model dependent).
Decreases temperature in 1 C/1 F
increments. Min. Temp. is 16 C/60 F.
Temperature Down
Swing
NOTE:
HEAT mode is not supported
by the cooling only appliance.
SET
Scrolls through operation
functions as follows:
The selected symbol will flash on
the display area, press the OK
button to confirm.
OK
Used to confirm the selected
functions.
TIMER
Set timer to turn unit on or off.
Clean
Used to start/stop the Active Clean
function.
Press together Clean button and
Turbo button at the same time more
than 5 seconds to activate Lock
function.
Press to enter the energy
efficient mode.
Fresh( ) Sleep( )
Follow Me( )
AP mode( ) Fresh
....
Starts and stops the horizontal louver
movement. Hold down for 2 seconds
to initiate vertical louver auto swing
feature(some units).
Information are displayed when the remote controller is powered up.
Transmission
Indicator
MODE
display
TIMER ON
display
FAN SPEED
display
TIMER OFF
display
Silence
feature
display
ECO
display
GEAR
display
LOCK
display
Horizontal louver
swing
display(some units)
Vertical louver
auto
swing display
TURBO mode
display
Not applicalbe for
this unit
Temperature/Timer/Fan speed
display
Fresh feature display
Sleep mode display
Follow me feature display
Wireless control feature display
(some units)
Low battery detection display(If flashes)
Note:
All indicators shown in the figure are for the purpose of clear presentation. But during the actaul
operation, only the relative function signs are shown on the display window.
Displays when LOCK feature
is activated.
Lights up when remote
sends signal to indoor
unit
Displays the current
including:
mode,
This fan speed can not be
adjusted in AUTO or DRY
mode.
Displays when ECO
Displays when GEAR feature
is activated
feature is activated
Displays the set temperature
by default, or fan speed or
timer setting when using
TIMER ON/OFF functions.
Temperature range:
o
o
16-30 C
/60-86 F or
o
o
20-28 C
/68-82 F
Timer setting range:
0-24 hours
This display is blank when
operating in FAN mode.
Not applicable for this unit
Not applicable for this unit
Not applicable for this unit
Not applicable for this unit
Active clean feature display
Breeze away feature display
Turbo
Enables unit to reach preset
temperature in shortest possible
time.
NOTE:
Press together &
buttons at the same time for 3 seconds
will alternate the temperature display
between the °C & °F.
Displays selected fan speed.
Silence
LOW
MED
HIGH
AUTO
2%-20%
21%-40%
41%-60%
61%-80%
81%-100%
1%
Fan speed setting range:
AU -100%
(Model dependent)
(Model dependent)
NTOE:
This feature is available
under cool, Fan and Dry mode only.
