Appendix A: The Chilled Water System Optimizer — Status only view of the Properties page
Chilled Water System Optimizer v2
CARRIER CORPORATION ©2019
Installation and Start-up Guide
49
All rights reserved
The following properties and points show only the current value or state. For more information, select the
Service
Config
or
Commissioning
view.
See
Appendix B
(page 58) for a list of default values and ranges for the properties.
At the top of the Properties page, there is a quick overview of system statuses
ENABLED/DISABLED — Optimizer
ENABLED/DISABLED — Chilled Water Supply Reset
__.__ degrees = Setpoint
__.__ degrees = Supply Temperature
__.__ degrees = Return Temperature
ENABLED/DISABLED — Condenser Water Supply Reset
__.__ degrees = Setpoint
__.__ degrees = Temperature
__.__ degrees = Outdoor Air Temperature
__.__ degrees = Outdoor Air Wet Bulb
__.__ degrees = Total Demand
__.__ degrees = Load
__.__ degrees = Efficiency
Appendix A: The Chilled Water System Optimizer
—
Status only view of
the Properties page