Installing the i-Vu® Open Router
i-Vu® Open Router
CARRIER CORPORATION ©2020
Installation and Start-up Guide
All rights reserved
9
7
Click
Open
. A window similar to the one below appears.
8
Do one of the following:
○
To change a property value:
a. Type the number of the property, then press
Enter
.
b. Type the new value, then press
Enter
.
○
To take an action, type number of the action, then press
Enter
.
9
If you changed a value, type
1
, then press
Enter
to restart the controller.
10
Close PuTTY.
11
Verify that you can communicate with the i-Vu® Open Router by issuing a PING command to the IP address
specified in step 12.
NOTE
Your computer must be on the same subnet as the i-Vu® Open Router for the PING command to work.
12
When finished, set the i-Vu® Open Router's
Router Config
Mode
DIP switch to
OFF
to restore normal
functionality to the Local Access port.
13
Cycle the i-Vu® Open Router's power to accept the
Router Config Mode
changes.
Summary of Contents for i-Vu CIV-OR
Page 4: ......
Page 35: ......
Page 36: ...CARRIER CORPORATION 2020 Catalog No 11 808 412 01 12 24 2020 ...
