FSFXXAOA1180: Installation and User Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
5
A200592
Flush to Ceiling
NOTE:
If the finishing will be done using the optional decorative
finishing trim (part no. KVAAC0101DFT), the springs included in the
optional kit should be installed before installing the brackets.
1. Using 4 screws no. 8-18 x 0.375 in., install the brackets on the unit
following the diagram below to adapt to the thickness of the ceiling.
DO NOT USE OTHER SCREWS.
A200593
2. Using 4 screws no. 10-12 x 0.625 in., install the unit between the
joists. This unit is designed to fit between 12-in. cc joists. if the
joists are closer, do not force the unit in—choose another
installation method.
A200594
NOTE:
Prior to painting, clean the metal housing using solvent and the
plastic decorative finishing trim using water.
Under Ceiling or Wall Mounted
1. Using 4 screws no. 8-18 x 0.375 in., install the brackets on the unit
as illustrated below. DO NOT USE OTHER SCREWS.
2. Using 4 screws no. 10-12 x 0.625 in. or longer screws if necessary,
secure the unit to the wall or ceiling, into the studs, joists or other
solid material.
NOTE:
When wall mounted, the unit can be positioned in any
orientation to suit your need.
A200595
Ceiling Hung
The brackets have been designed to allow that the unit be hung using
threaded rods.
1. Using 4 screws no. 8-18 x 0.375 in., install the brackets in one of
both ways illustrated below. DO NOT USE OTHER SCREWS. Use
nuts to secure the unit.
A200596
In the Attic
IMPORTANT:
Do not install in an attic where the temperature may
exceed 160 °F.
1. Using 4 screws no. 8-18 x 0.375 in., install the brackets on the unit
as illustrated for Under Ceiling or Wall Mounted. DO NOT USE
OTHER SCREWS.
2. Using 4 screws no. 10-12 x 0.625 in., secure the unit to the joists or
cross framing.
A200597
With optional
decorative trim
FLUSH TO CEILING
VD0467
12"
ATTIC MOUNTED
VD0466
12"
VH0152
10"
10"
WALL MOUNTED
UNDER CEILING
10¼"
VH0154
10"
CEILING HUNG
VH0153A
14¼" clearance
X
VD0470
SCREW POSITION ACCORDING
TO CEILING THICKNESS
X = 1-3/8 in.
X = 1-1/4 in.
X = 5/8 in.
X = 1/2 in.
VD0471
BRACKET INSTALLATION
