73
MANUAL DE INSTALAÇÃO, OPERAÇÃO E MANUTENÇÃO / MANUAL DE INSTALACIÓN,
OPERACIÓN Y MANTENIMIENTO / INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Carrier
In case of power supply loss is necessary to
program the Timer function again.
In COOL operation, the equipment reduces the room
temperature up to the one selected by you, between 18
and 29°C. Use the keys UP or DOWN in order to set
the temperature within the ideal range for your comfort.
In the HEAT selection, the equipment increases the room
temperature up to the one selected by you, between 18
and 29°C. Use the keys UP or DOWN in order to set the
temperature within the ideal range for your comfort.
The HEAT selection is available only for units that
operate in cooling & heating.
A smart system that automatically adjusts the equipment
to the room temperature, changing between cool and
heat and high, medium and low speed. Example: if you
set the temperature at 20°C and the room temperature
is 28°C, when you press the "auto" function, the
equipment will operate at high speed and in cooling.
When the temperature becomes near the set
temperature of 20°C, it will automatically change to
medium speed, and when it reaches the 20°C to low
speed.
In des-humidification, it is not possible to
change the speed.
The key RESET has the function of
resetting all the options and configurations
made on the remote control allowing, thus,
a new configuration.
10
7
8
It allows programming the unit operation
and defining the time to turn it on or off.
When this function is activated, it will
operate daily in this configuration.
To program it, just press the ON key
(Timer function) defining the time for the
operation start and the OFF key (Timer
function) to define the end of the
operation. The operating hours shall be defined through
the keys HOUR and Minute on the remote control.
In order to deactivate the function, press the key ON
(Timer function) twice. When CL appears on the display,
press the SEND key and repeat the command using the
OFF key. (Timer function).
4
Pressing the FAN key you select the
desired VENTILATION SPEED.
Low ventilation
Medium ventilation
High ventilation
5
The SWEEP function is not available for
the 42B units.
In order to set the clock, press the
CLOCK key on the remote control. From
this moment on, the clock function starts
blinking on the display, allowing setting
the clock on the keys HOUR and
6
MINUTE. After setting the clock, press the key SEND, to
end the operation.
12
To offer you more comfort while you
sleep, press the SLEEP key before you get
asleep. This function adjusts gradually the
temperature preventing the excessive
cold or heat due to the deceleration of the body
metabolism.
After this function is activated, the equipment will
increase (in cooling) or decrease (in heating) the setpoint
temperature in 1°C per hour during the first two hours,
remaining in this temperature for more 6 hours. After
the total 8-hour period is elapsed, the equipment will
return to the initial temperature.
The remote control display will exhibit the following
symbol:
11
In order to cool or heat quickly the
room, set the equipment as desired and
press the TURBO key on the remote
control. The turbo will turn off as soon as
the selected temperature is achieved.
From then on, the previous function will take on. The
word Turbo will appear on the remote control display
indicating the command.
9
Pressing the HOUR and MINUTE key, you
set the hours and minutes respectively for
the START and END HOUR of the TIMER
and the CURRENT TIME. To set the
START HOUR of the TIMER and the END HOUR of the
TIMER, the minutes will be adjusted at intervals of 10.
Summary of Contents for Fan Coil 42B
Page 53: ......
Page 79: ......
Page 80: ...IOM 42B 60Hz D 07 04 ISO 9001 ISO 14001 OHSAS 18001 www carrierbrazil com br 256 08 583...