![background image](http://html1.mh-extra.com/html/carrier/fan-coil-42b/fan-coil-42b_installation-operation-and-maintenance-manual_2561260058.webp)
58
MANUAL DE INSTALAÇÃO, OPERAÇÃO E MANUTENÇÃO / MANUAL DE INSTALACIÓN,
OPERACIÓN Y MANTENIMIENTO / INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Carrier
Receiving and Inspecting the Units
6
* Check the unit weight and dimensions for a proper and safe
handling.
* Before working on the units, be sure to turn off the power supply,
turn off the power supply.
* Never insert fingers or any other objects inside the units when the
fan is running.
* In order to avoid damage while moving or
transporting the unit, do not remove the packaging
until arriving at the definitive installation site.
* Avoid that ropes, chains or any other parts
touch the unit.
* To keep the warranty, prevent the units from
being exposed to possible work accidents, and
move the unit immediately to its installation site or
any other safe location.
* When unpacking and removing the
protections do not dispose them as they may be
eventually used as a protection against dust or
other damaging agents until the unit is complete
and the system ready to start operating.
Never lift or move the unit by the pans. Hold it
on the metallic parts as shown in picture.
HANDLING THE 42B UNITS
Installation
7
7.1
General Recommendations
First of all, check the applicable codes or
norms for the equipment installation at the chosen
site in order to assure that the designed system
complies with them.
Plan carefully the unit location to avoid
eventual interference from any other kind of
existing (or projected) installations, as electrical
wiring, water and sewer piping, etc.
Install the units so that they are free from any
kind of obstruction at the return or insufflation air
intake.
Choose locations with spaces that allow any kind
of repairs and services and the ductwork passage
(copper or steel tubes, electric wiring and drain).
After they are installed, remember to check if
the units are leveled.
It is imperative to provide a hydraulic line for the
condensate draining. This hydraulic line shall not have
a diameter smaller than 1/2". It shall also have a
siphon next to the outlet in order to assure a perfect
air insulation and declivity. At the initial start-up, this
siphon shall be filled with water to prevent the air
suction from the draining line.
Summary of Contents for Fan Coil 42B
Page 53: ......
Page 79: ......
Page 80: ...IOM 42B 60Hz D 07 04 ISO 9001 ISO 14001 OHSAS 18001 www carrierbrazil com br 256 08 583...