![background image](http://html1.mh-extra.com/html/carrier/fan-coil-42b/fan-coil-42b_installation-operation-and-maintenance-manual_2561260067.webp)
67
MANUAL DE INSTALAÇÃO, OPERAÇÃO E MANUTENÇÃO / MANUAL DE INSTALACIÓN,
OPERACIÓN Y MANTENIMIENTO / INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Carrier
* If your Aquasnap unit (heat pump) is operating with chilled water
and heating is requested on the remote control (42B), its inside unit
will turn off the valve. However, if you set a higher setpoint
temperature in the thermostat, the control will enable the valve again,
but the chilled water will enter (as there is only one valve at the inside
unit). Then, the chiller will supply chilled water, generating discomfort
since heating was requested.
* The same precaution shall be taken for Aquasnap units (heat pump)
when they are operating for hot water and cooling is requested on the
remote control (42B): its inside unit will turn off the valve. However, if
the thermostat is set for a lower setpoint temperature the control will
enable again the valve. But the hot water will be entering (since there
is only one valve in the unit) and the chiller will be generating
discomfort because cooling was requested.
* The precautions above are important since the control of the
terminal unit does not control the chiller. If this function is required, we
recommend the use of units without control or the use of Carrier "Fan
Coil Controller" or other controllers of the CCN line.
Set your controller to the same operating mode of the chilled or hot
water supply unit (chiller).
Summary of Contents for Fan Coil 42B
Page 53: ......
Page 79: ......
Page 80: ...IOM 42B 60Hz D 07 04 ISO 9001 ISO 14001 OHSAS 18001 www carrierbrazil com br 256 08 583...