![background image](http://html.mh-extra.com/html/carrier/aquasnap-touch-pilot-junior-30rqs/aquasnap-touch-pilot-junior-30rqs_installation-operation-and-maintenance-instructions_2563392027.webp)
27
9 - ELECTRICAL DATA, 30RQS AND 30RQSY UNITS
9.1 -
Short-circuit stability current (TN system
(1)
)
30RQS/RQSY
039
045
050
060
070
078
080
090
100
120
140
160
Value with unspecified upstream protection
Short-term current at 1 s - Icw - kA rms
3.36
3.36
3.36
3.36
3.36
3.36
3.36
5.62
5.62
5.62
5.62
5.62
Admissible peak current - Ipk - kA pk
20
20
20
20
20
15
15
20
20
15
20
15
Max. value with upstream protection (circuit breaker)
Conditional short-circuit current Icc - kA rms
40
40
40
40
40
40
40
40
40
40
30
30
Schneider circuit breaker - Compact series
NS100H NS100H NS100H NS100H NS100H NS100H NS100H NS100H NS160H NS160H NS250H NS250H
Reference number
(2)
29670
29670
29670
29670
29670
29670
29670
29670
30670
30670
31671
31671
(1) Earthing system type
(2) If another current limitation protection system is used, its time-current and thermal constraint (I²t) trip characteristics must be at least equivalent to those of the
recommended Schneider circuit breaker.
The short-circuit stability current values above are suitable with the TN system.
9.2 -
Electrical data, hydraulic module
The pumps that are factory-installed in these units comply with the European Ecodesign directive ErP. The additional electrical
data required
(1)
is as follows:
Motors of single and dual low-pressure pumps
(OPTIONS 116T, 116U)
No.
(2)
Description
(3)
30RQS/RQSY
039 045 050 060 070 078 080 090 100 120 140 160
1
Nominal efficiency at full load and nominal voltage
%
81,1 81,1 81,1 81,1 81,1 81,1 81,1 81,1 83,4 83,4 84,8 84,8
1
Nominal efficiency at 75% rated load and nominal voltage
%
80,8 80,8 80,8 80,8 80,8 80,8 80,8 80,8 81,2 81,2 82,2 82,2
1
Nominal efficiency at 50% rated load and nominal voltage
%
77,5 77,5 77,5 77,5 77,5 77,5 77,5 77,5 78,3 78,3
79
79
2
Efficiency level
IE3
3 Year of manufacture
This information varies depending on the manufacturer and model at the
time of incorporation. Please refer to the motor name plates.
4
Manufacturer's name and trademark, commercial
registration number and place of manufacturer
5
Product's model number
6
Number of motor poles
2
2
2
2
2
2
2
2
2
2
2
2
7-1
Rated shaft power output at full load and nominal voltage
(400 V)
kW
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
1,3
1,3
1,7
1,7
7-2
Maximum power input (400 V)
(4)
kW
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,6
1,6
2,4
2,4
8 Rated input frequency
Hz
50
50
50
50
50
50
50
50
50
50
50
50
9-1
Rated voltage
V
3 x 400
9-2
Maximum current drawn (400 V)†
A
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,1
2,9
2,9
4,2
4,2
10 Rated speed
rpm 2850 2850 2850 2850 2850 2850 2850 2850 2890 2890 2870 2870
r/s
47
47
47
47
47
47
47
47
48
48
48
48
11
Product disassembly, recycling or disposal at end of life
Disassembly using standard tools. Disposal and recycling using an
appropriate company.
12
Operating conditions for which the motor is specifically designed
I
- Altitudes above sea level
m
< 1000††
II
- Ambient air temperature
°C
< 55
IV
- Maximum air temperature
°C
Please refer to the operating conditions given in this manual or in the
specific conditions in the Carrier selection programs.
V
- Potentially explosive atmospheres
Non-ATEX environment
(1) Required by regulation 640/2009 with regard to the application of directive 2009/125/EC on the eco-design requirements for electric motors
(2) Item number imposed by regulation 640/2009, annex I2b.
(3) Description given by regulation 640/2009, annex I2b.
(4) To obtain the maximum power input for a unit with hydraulic module add the maximum unit power input from the electrical data table to the pump power input.
† To obtain the maximum unit operating current draw for a unit with hydraulic module add the maximum unit current draw from the electrical data table to the pump current
draw.
†† Above 1000 m, a degradation of 3% for each 500 m should be taken into consideration.