background image

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

56816

Owner’s Manual & Safety Instructions

Save This Manual

 

Keep this manual for the safety warnings and precautions, assembly, 

operating, inspection, maintenance and cleaning procedures.  Write the product’s serial number in the 

back of the manual near the assembly diagram (or month and year of purchase if product has no number). 

Keep this manual and the receipt in a safe and dry place for future reference.

 

21k

When unpacking, make sure that the product is intact 

and undamaged.  If any parts are missing or broken, 

please call 1-888-866-5797 as soon as possible.

Copyright

©

 2011 by Harbor Freight Tools

®

.  All rights reserved.  

No portion of this manual or any artwork contained herein may be reproduced in 

any shape or form without the express written consent of Harbor Freight Tools.  

Diagrams within this manual may not be drawn proportionally.  Due to continuing 

improvements, actual product may differ slightly from the product described herein.  

Tools required for assembly and service may not be included.

Read this material before using this product. 

Failure to do so can result in serious injury. 

SAVE THIS MANUAL.

Summary of Contents for 45743

Page 1: ...eference 21k When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 888 866 5797 as soon as possible Copyright 2011 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this ma...

Page 2: ...Cluttered areas invite injuries 5 Keep Barrel Pump and fluids away from all ignition sources and flammable materials 6 Observe work area conditions Do not use the Pump in damp or wet locations Don t expose to rain Keep work area well lighted 7 Assemble and use only according to these instructions 8 Wear ANSI approved safety goggles during assembly and use 9 Do not assemble or use when tired or whe...

Page 3: ...tion Pipe 7 Slide Handle onto Pump Body shaft 8 Tighten bolt 9 Place PTFE tape onto Delivery Spout threads 10 Screw Delivery Spout to Pump Body Operation 1 Assemble Barrel Pump as described 2 Turn Delivery Spout upwards and pour in a few drops of applicable liquid 3 Attach hose not included to end of Delivery Spout if needed 4 Place container under Delivery Spout or hose end 5 Submerge lower half ...

Page 4: ... parts loose or missing parts and any condition that may affect proper operation of product If a problem occurs correct before further use 2 Periodically use a light lubricant on Handle s pivot parts 3 Keep suction and delivery ports free of dirt and debris 4 After each use wipe off unit Store in a clean dry place out of reach of children Record Serial Number Here Note If product has no serial num...

Reviews: