Carrier 62MB, Installation, Start-Up And Service Instructions Manual

Page: 82 / 82

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No. 536-220 Printed in U.S.A. Form 62M-1SI Pg CL-1 1-06 Replaces: New
Book 1 4
Tab 1a 12a
START-UP CHECKLIST
A. Project Information: Start-Up Performed By ____________________________
Name __________________________________________________
Job Name ______________________________________________
ERV Unit Designation ____________________________________
Phone Number __________________________________________
Design Information
Application Coupled to rooftop unit or stand-alone.
CFM
External Static Pressure
Supply Discharge
Down or horizontal (use horizontal for mated application)
Return Discharge Down or horizontal (use horizontal for mated application)
Voltage/Phase
ERV Unit Part Number
Specify Rooftop Unit. NOTE: Complete This Section for Coupled Applications Only
Model Number
HVAC Unit Discharge Type
Down discharge or horizontal discharge.
Roof Curb (Option) Yes No
14-in. Tall Roof Curb Field install
Vibration Isolation Curb Field install
Transition (Option) NOTE: Complete This Section for Coupled Applications Only.
Rooftop Unit Discharge Down or horizontal discharge rooftop unit.
Percent Outside Air Outside air thru ERV unit as a percent of total rooftop unit cfm.
Transition Part Number Field install
Inside Mounting Kit (Option) Yes No NOTE: Complete This Section for Indoor Applications Only.
Factory installed Removes rainhoods and adds duct flanges.
Electrical Disconnect (Option) Yes No
Fused Factory installed
Switched Factory installed
Two-Position Motorized Dampers (Option) Yes No
Outside Air Damper Factory installed
Exhaust Air Damper Factory installed
Economizer (Accessory for Rooftop Unit) Yes No
NOTE: Do Not Use With Wheel Bypass Option.
Field install Special economizers required for some rooftop units. See the price pages.
Wheel Bypass With Stop Jog Control (Option) Yes No NOTE: Do Not Use With Economizer Option.
Factory installed Stops the ERV wheel rotation for free-cooling.
Stop Jog Control (Option) Yes No NOTE: Use With Economizer Option.
Factory installed Jogs the wheel during economizer mode to expel contaminants.
Pre-Heater (Option) Yes No
kW Factory installed
Temp Control
Temp and Static Pressure Control
Frost Protection (Option) Yes No NOTE: Do Not Use With Pre-Heater.
Factory installed Defrosts wheel with exhaust air, by shutting down OA blower.
Low Temperature Lock Out (Option) Yes No
Factory installed Shut down ERV unit at low temperature set point.
Filter Maintenance Indicator (Option) Yes No
Factory installed Senses static pressure across OA filters (can be set for return filters).
ERV Blower Maintenance Indicator (Option) Yes No
Factory installed Monitors OA and EA blowers and sends signal on electrical spike.
ERV Wheel Maintenance Indicator (Option) Yes No
Factory installed Monitors ERV wheel and sends signal on electrical spike.
Airflow Monitor (Option) Yes No
Factory installed Gages display static pressure across wheel for OA and exhaust air.
ERV Control Timer (Option) Yes No
24 Volt Mounted in ERV Factory installed 24 hour / 7 day timer mounted in ERV unit.
115 Volt Remote Mount Field install 24 hour / 7 day timer field mounted in remote location.
VAV Control (Option) Yes No
Factory installed Provides independent VFD control for both OA and exhaust air.
CO
2
Sensor (Option) Yes No
Wall Mount or Duct Mount Field install
Duct Mount With External View Field install
For 62M040 Cabinet Only Yes No
Equipment Support Field installed Use for coupled applications.
Base Rail Option Factory installed Must be ordered when 62M040 sits on a roof curb.
Hinged Door Option Factory installed Provides hinges and latches on both access doors.
2-in. Filters Option Factory installed Replaces the standard 1-in. filters with 2-in. high efficiency, pleated.
Door Interlock Safety Switches Factory installed Cuts power to ERV unit when access doors are opened during operation.
Test Port Option Factory installed Allows for convenient monitoring of static / airflow across ERV wheel.