( 18 )
USE OF WIRED CONTROLLER (Cont.)
COOL ONLY / COOL - HEAT Selection Function
When you press the
COOL / HEAT
button,
Use a small stick with a diameter of 1mm to push the button
to switch modes. For COOLING ONLY type, it will be no
heating mode when pressing MODE. The uniform mode is
COOLING and HEATING at the factory.
RESET Function
When you press the recessed
RESET
button,
all current settings are cancelled and return to original
factory settings.
•
The clock time “12:00” will flash
•
The mode displays “AUTO”
•
The fan speed displays “AUTO”
•
The temperature displays “24”
Note : You will need to reprogram the clock setting after
Pressing RESET button
( Refer to CLOCK adjusting function Page 9 )
LOCK Function
1. Use
LOCK
function when you want to prevent settings
from being changed accidentally.
1.
When you press the recessed
LOCK
button, all current
settings are locked in and the remote control does not
accept any operation except that of the
LOCK
.
2.
A
LOCK
symbol
will appear on the bottom right
hand sides of the remote control display when the LOCK
function is activated.
3.
If you want to cancel
LOCK
function,
Press
LOCK
button again.