![background image](http://html.mh-extra.com/html/carrier/53qdmt-12/53qdmt-12_owners-manual_2563375012.webp)
( 9 )
USE OF WIRED CONTROLLER (Cont.)
HEAT MODE
START
1. Press MODE button to select
mode
on the wired controller display.
2. Press TEMP buttons or
to select the set temperature
on the wired controller display.
Set desired temperature
between 17°C and 30°C.
3. Press FAN SPEED button to select
the desired fan speed on the
wired controller display.
4. Press ON/OFF button to start
the air conditioner.
OPERATION lamp on the
display panel will light on
HEAT mode starts after
approximately 3 minutes.
STOP
If you want to stop the air conditioner,
Press ON/OFF button again.
NOTES
•
If the room temperature is lower than the selected temperature,
the system will start HEAT mode.
•
If the room temperature is equal to or higher than the selected temperature,
the system will stop HEAT mode.
•
If you use AUTO fan speed with HEAT mode, the fan speed changes
automatically to low or medium or high speed based on the temperature
difference between setting temperature and room temperature.
2
2
1
3
4