![background image](http://html1.mh-extra.com/html/carrier/50lc-07/50lc-07_service-and-maintenance-instructions_2561600065.webp)
65
5. Entering Motor Data:
a. Press the
Menu
key to move the
B
(triangle
icon) so it is positioned over Main Menu. The
display show the following --
0---** Operation / Display
1---** Load and Motor
b. Press
B
(
Down Arrow)
once to highlight the
bottom row.
c. Press
OK
, the display changes to --
1---0* General Settings
1---1* Motor Selection
d. Press
B
(
Down Arrow)
twice to reach the follow-
ing display --
1---1* Motor Selection
1---2* Motor Data
e. Press
OK
, the following display appears --
1-20 Motor Power
[9] 1.5kW --- 2 hp
NOTE
: The number in the bracket may be different from
what is shown above.
f. Press
OK
and then use the
Y
and
B
(
Up
and
Down Arrow
) keys to scroll to the proper motor
horsepower. Press
OK
again to set the selected hp.
g. Press
B
(
Down Arrow)
once, the following
display appears --
1-22 Motor Voltage
230V
h. Press
OK
to highlight the voltage value. Use the
Y
and
B
(
Up
and
Down Arrow
) keys to select
the nameplate voltage. Press
OK
again to set the
selected voltage.
i. Press
B
(
Down Arrow)
once to display the
following --
1-23 Motor Frequency
60Hz
j. Press
OK
to highlight the Frequency value and
then use the
Y
and
B
(
Up
and
Down Arrow
)
keys to select the nameplate Hz. Press
OK
again
to set the selected Hz.
k. Press
B
(
Down Arrow)
once to display the
following --
1-24 Motor Current
6.61A
l. Press
OK
to highlight the Current value and
then use the
Y
and
B
(
Up
and
Down Arrow
)
keys to select the Max Amps value provided.
Press
OK
again to set the selected Max Amps.
NOTE
: The Max Amps is greater than the nameplate
value. Check the VFD Unit Parameters (see Table 21 on
page NO TAG) and use the value listed for the given unit
in the column labeled “Motor Current Must--Hold Amps”.
m. Press
B
(
Down Arrow)
once to display the
following --
1-25 Motor Nominal Speed
1740rpm
n. Press
OK
to highlight the rpm value and then
use the
Y
and
B
(
Up
and
Down Arrow
) keys
to select the nameplate rpm. Press
OK
again to
set the selected rpm.
6. Entering Parameters for 1--71, 1--73, 1--82, and 1--90:
a. Press the
Menu
key to move the
B
(triangle
icon) so it is positioned over Main Menu. The
display show the following --
0---** Operation / Display
1---** Load and Motor
b. Press
B
(
Down Arrow)
once to highlight the
bottom row.
c. Press
OK
, the display changes to --
1---0* General Settings
1---1* Motor Selection
d. Press
B
(
Down Arrow)
until the following display
appears --
1---6* Load Depen. Setting
1---7* Start Adjustments
e. Press
OK
, the following display appears --
1-71 Start Delay
2.0s
f. Press
OK
to highlight the number and then use
the
Y
and
B
(
Up
and
Down Arrow
) keys to
select the number provided in Table 21. Press
OK
again to set the selected value.
g. Press
B
(
Down Arrow)
twice, the following
display appears --
1-73 Flying Start
[1] Enabled
h. Press
OK
to highlight the number in the bracket
and then use the
Y
and
B
(
Up
and
Down Ar-
row
) keys to select the number provided in Table
21. Press
OK
again to set the selected value.
i. Press the
Back
key once, the following display
appears --
1---6* Load Depen. Setting
1---7* Start Adjustments
j. Press
B
(
Down Arrow)
once, the following
display appears --
1---7* Start Adjustments
1---8* Stop Adjustments
k. Press
OK
, the following display appears --
1-80 Function at Stop
[0] Coast
Summary of Contents for 50LC 07
