![background image](http://html1.mh-extra.com/html/carrier/50lc-07/50lc-07_service-and-maintenance-instructions_2561600062.webp)
62
Off
Reset
Hand
On
Alarm
Warn.
On
Com.
OK
Ba
ck
Auto
On
Status
Menu
Quick
Menu
Main
Menu
1-20 Motor Power
[2] 0.12KW-0.16HP
Setup 1
ALPHA
NUMERIC
DISPLAY
MENU KEY
NAVIGATION
KEYS
AND
STATUS
LEDs
OPERATION KEYS & LEDs
C13112
Fig. 66 -- VFD Keypad
Alpha Numeric Display:
The LCD display is back lit with
2 alpha--numeric lines. All data is displayed on the LCD.
1-20 Motor Power
[2] 0.12KW-0.16HP
Setup 1
1
3
2
4
5
C13113
1
Parameter number and name.
2
Parameter value.
3
Setup number shows the active setup and the edit
setup. If the same set--up acts as both the active
and edit set--up, only that setup number is shown
(factory setting). When the active and edit setup
differ, both numbers are shown in the display
(SETUP 12). The flashing number indicates the
edit setup.
4
The symbol in the number 4 position in the figure
above indicates motor direction. The arrow point
either clockwise or counter--clockwise to show the
motor’s current direction.
5
The position of the triangle indicates the currently
selected menu: Status, Quick Menu or Main Menu.
Menu Key:
Use the Menu key to select between Status,
Quick Menu or Main Menu. The triangle icon at the bottom
of the LCD display indicates the currently selected mode.
(See number 5 in the table above.)
Navigation Keys and Status LEDs:
The Navigation keys
and Status LEDs are detailed in the following table.
Alarm
Warn.
On
Com.
OK
Ba
ck
3
4
1
2
5
6
5
7
C13114
1
Com.
LED: Flashes when bus communications is
communicating.
2
Green LED/
On
: Control selection is working.
3
Yellow LED/
Warn
.: Indicates a warning.
4
Flashing Red LED/
Alarm
: Indicates an alarm.
5
Arrows
YB
: Use the Up and Down arrow keys
to navigate between parameter groups, parameters
and within parameters. Also used for setting local
reference.
6
Back
key: Press to move to the previous step or
layer in the navigation structure.
7
OK
key: Press to select the currently displayed
parameter and for accepting changes to parameter
settings.
Operation Keys and LEDs:
The following table details the
functions of the Operating keys. An illuminated yellow LED
above the key indicates the active key.
Off
Reset
Hand
On
Auto
On
1
2
3
C13115
1
Hand On
key: Starts the motor and enables
control of the variable frequency drive (VFD) via
the VFD Keypad option.
NOTE
:
Please note that terminal 27 Digital
Input
(5--12 Terminal 27 Digital Input)
has coast
inverse as default setting. This means that the
Hand On key will not start the motor if there is no
24V to terminal 27, so be sure to connect terminal
12 to terminal 27.
2
Off/Reset
key: Stops the motor (off). If in alarm
mode the alarm will be reset.
3
Auto On
key: The variable frequency drive is
controlled either via control terminals or serial
communication.
Connecting the Keypad to the VFD
The VFD keypad can be mounted directly to the variable
frequency drive, provided you can easily access the front
panel of the VFD. If you don’t have easy access to the
VFD front panel, use the cable included with the kit to
connect the keypad to the VFD.
Summary of Contents for 50LC 07
