21
CHOOSING THE UNIT LOCATION
1) Indoor Unit
•
Leave the space shown in Figure. 1 for servicing or
removing the filter and for good air flow and for safety.
•
If the room using the air conditioner has florescent
lighting with electronic starter, signals may not be
properly received. Keep the indoor unit away from
fluorescent lamp to receive the signal from remote.
•
Leave the space shown in Figure. 2 between the unit and any
obstruction for good air flow.
2) Outdoor Unit
CAUTION
Installation in the following places may cause problems.
If it is unavoidable to use the unit in such places, consult
with your distributor.
•
A place with machine oil.
•
A saline place such as a seashore vicinity.
•
A place with sulphur gas.
•
A place where high-frequency waves are generated
by radio equipment, welders, and medical equipment.
Installation in the following places may cause
problem.
If it is unavoidable to use the unit in such places,
consult with your distributor.
•
A place with an oily ambient.
CAUTION
10cm or
more
10cm or more
50cm
or
more
60cm or more
508 mm
319 mm
300 mm
800 mm
600 mm
363 mm
320 mm
900 mm
Figure
2
Figure 1
9cm or more
10cm or
more
20cm or
more
1460mm
m
m
0
4
3
277mm
2m or more