14
Ioniser function button
...................................................................................
UNIT OPERATION
Press this button to set the SLEEP timer with remote control on. The icon will
appear on the display.
This procedure permits setting the remaining unit operating time.
Sleep timer procedure “night”
..........................................................................
1
Sleep Timer
“1:hr” will be displayed together with the icon.
Press button (temperature increase).
The display will show the following settings in sequence:
1 hr, 2 hr, 3 hr, 4 hr, 5 hr, 6 hr, 7 hr, 8hr and 9 hr.
Once the remaining operating hours have been selected
with either button or , again press button
to
confirm.
When the SLEEP timer is set, the unit will control the
set temperature to avoid overcooling or overheating
during operation. Also indoor fan operates at low fan
speed regardless of user selection.
The set temperature will change as follows:
2
3
4
Turbo mode and Ioniser function
Turbo mode button
....................................................................................
If you want more powerful capacity at Cooling and Heating mode, press
During Turbo mode, you cannot control room temperature, and fan speed.
press one of the buttons or to cancel the turbo mode.
button . On the display, the powerful icon will start flashing.
Turbo mode at Cooling mode
Performs the powerful cooling operation until room
temperature reach 17ºC or 20 minutes after pressing
turbo mode button.
At this mode, indoor fan speed is high and compressor
speed is over rating speed in order to obtain maximum
cooling capacity.
Performs the powerful heating operation until room
temperature reach 32ºC or 20 minutes after pressing
turbo mode button.
At this mode, indoor fan speed is high and compressor
speed is over rating speed in order to obtain maximum
heating capacity.
Turbo mode at Heating mode
1
2
•
When the SLEEP timer is set, the luminosity of the unit lamps will be dimmed
so as not to interrupt sleep.
•
The SLEEP timer can be combined with the ON timer.
NOTE
Press Ioniser button
to activate Ioniser function
during unit ON.
Press Ioniser button
again to stop
Ioniser function.
1
2