![background image](http://html1.mh-extra.com/html/carrier/42tsv052p1/42tsv052p1_installation-manual_2560883005.webp)
3
installation manual
3. ATTACHED FITTINGS
Please check whether the following fittings are of full scope. If there are some spare fittings , please restore them carefully.
Fig.3-1
Never throw or beat the controller.
Before installation, operate the remote controller to determine its location in a
reception range.
Keep the remote controller at least 1m apart from the nearest TV set or stereo
equipment. (it is necessary to prevent image disturbances or noise interferences.)
Do not install the remote controller in a place exposed to direct sunlight or close to a
heating source, such as a stove.
Note that the positive and negative poles are right positions when loading batteries.
This manual is subject to changes due to technological improvement without further
notices.
Cautions on remote controller installation:
Remote
controller
Remote controller
holder
Mounting screw B
ST2.9x10-C-H
CANCEL
LOCK
SET TEMPERATURE(°C)
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
TEMP
MODE
SWING
TIMER
RESET
ON/OFF
FAN
SPEED
VENT
ECONOMIC
RUNNING
(depending on the models)
Fig.3-1
Never throw or beat the controller.
Before installation, operate the remote controller to determine its location in a
reception range.
Keep the remote controller at least 1m apart from the nearest TV set or stereo
equipment. (it is necessary to prevent image disturbances or noise interferences.)
Do not install the remote controller in a place exposed to direct sunlight or close to a
heating source, such as a stove.
Note that the positive and negative poles are right positions when loading batteries.
This manual is subject to changes due to technological improvement without further
notices.
Cautions on remote controller installation:
Remote
controller
Remote controller
holder
Mounting screw B
ST2.9x10-C-H
CANCEL
LOCK
SET TEMPERATURE(°C)
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
TEMP
MODE
SWING
TIMER
RESET
ON/OFF
FAN
SPEED
VENT
ECONOMIC
RUNNING
(depending on the models)
Fig.3-1
Never throw or beat the controller.
Before installation, operate the remote controller to determine its location in a
reception range.
Keep the remote controller at least 1m apart from the nearest TV set or stereo
equipment. (it is necessary to prevent image disturbances or noise interferences.)
Do not install the remote controller in a place exposed to direct sunlight or close to a
heating source, such as a stove.
Note that the positive and negative poles are right positions when loading batteries.
This manual is subject to changes due to technological improvement without further
notices.
Cautions on remote controller installation:
Remote
controller
Remote controller
holder
Mounting screw B
ST2.9x10-C-H
CANCEL
LOCK
SET TEMPERATURE(°C)
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
TEMP
MODE
SWING
TIMER
RESET
ON/OFF
FAN
SPEED
VENT
ECONOMIC
RUNNING
(depending on the models)
Fig.3-1
Never throw or beat the controller.
Before installation, operate the remote controller to determine its location in a
reception range.
Keep the remote controller at least 1m apart from the nearest TV set or stereo
equipment. (it is necessary to prevent image disturbances or noise interferences.)
Do not install the remote controller in a place exposed to direct sunlight or close to a
heating source, such as a stove.
Note that the positive and negative poles are right positions when loading batteries.
This manual is subject to changes due to technological improvement without further
notices.
Cautions on remote controller installation:
Remote
controller
Remote controller
holder
Mounting screw B
ST2.9x10-C-H
CANCEL
LOCK
SET TEMPERATURE(°C)
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
TEMP
MODE
SWING
TIMER
RESET
ON/OFF
FAN
SPEED
VENT
ECONOMIC
RUNNING
(depending on the models)
QUANTITY
Tubing & Fittings
Remote controller & Its Frame
Drainpipe Fittings
Installation Fittings
SHAPE
NAME
14. Expansible hook
3. Out-let pipe sheath
4. Out-let pipe clasp
5. Drain joint
6. Seal ring
12. Owner's manual
13. Installation manual
8. Remote controller
9. Remote controller holder
10. Mounting screw(ST2.9×10-C-H)
11. Alkaline dry batteries (AM4)
15. Installation hook
1. Installation paper board
4
1
4
1
1
1
1
1
1
1
2
2
1
1
2. Insulation sheath
Installation accessory
(The product you have might not be
provided the following accessory)
(
Match with
remote controller
)
EMC & Its Fitting
(on some models)
16. Magnetic ring
(twist the electirc wires P&Q&E around
the magnetic ring to two circles)
1
Q
P
E
Wired controller
(Match with wire controller )
7. Wired controller
1
swing
swing
Summary of Contents for 42TSV052P1
Page 21: ...202000192390...