background image

Ductable air-cooled scroll 

chillers and heat pumps

5

1. I

NTRODUCTION

2. O

PERATION

 

LIMITS

•  30PA/PAC

  Air-cooled water chillers.

•  30PH/PHC

Reversible heat pump units for operation in negative outdoor 
temperatures (greater than -15ºC WB) for water heating and cooling. 
Defrosting by reversing the cycle.

After manufacturing, all units are charged with refrigerant and 

are tested at the factory, verifying the correct operation of all their 

components within the operating range for which they are intended.

The units comply with European Directives: Machinery 2006/42/EC - 
EMC 2014/30/EU - LVD 2014/35/EU - PED 2014/68/EC (Category 2) 
- RoHS 2011/65/EU - Eco-design 2009/125/CE - Eco-labelling 2010/30/
EU; and with Harmonised Standard: EN 378-2:2012.
Those in charge of the installation, commissioning, operation and 
maintenance of the unit must know the instructions contained in this 
brochure and the speci

fi

 c technical characteristics of the installation place.

The 

30PA/PH

 cooling only and reversible heat pumps are compact 

outdoor air/water units. 
Available in two versions: 

•  STD (Standard)
•  HEE (High Energy Ef

fi

 ciency) 

These units have been made for operation indoors in the production 
of hot and/or cold water, applicable to heating, cooling, and industry.  
They are equipped with centrifugal fan (STD version) or electronic plug-
fan (HEE version), plate exchanger, hermetic scroll compressor, and 
electronic control with microprocessor, components optimised for the 
R-410A refrigerant.
This range is also offered with an integrated circulation pump: 

30PAC/PHC

.

The entire range also has the option to include a desuperheater circuit 
that allows for the production of hot water at a temperature greater than 
in the condensation circuits.

+18

+5

0

-7

-15

+46

+55

+50

+45

+30

+20

+10

+0

-10

-15

+12

Outdoor 

temperature °C DB

Mandatory glycol

Outlet water temp. in the evaporator °C

Condensation pressure control

Outdoor 

temperature °C DB

Outlet water temp. in the condenser °C

  

With control of the condensation pressure operating up to -15ºC.

  

Minimum outlet temperature. With the option of glycol water for lower 

temperature operation from 5ºC to -7ºC.

Series

Cooling mode

Heating mode

Air

Water 

(outlet T.)

Air

Water 

(outlet T.)

Max.

Min.

Max. Min.

Max.

Min.

Max. Min.

30PA/PAC

46ºC 12ºC 

18ºC 5ºC 

--

--

--

--

30PH/PHC

46ºC 12ºC 

18ºC 5ºC 

20ºC DB -15ºC DB 55ºC 30ºC

Summary of Contents for 30PA





































Reviews: