Carrier Access Wide Bank 28 DS3, Overview, Page: 42 / 50

40 Wide Bank 28 DS3 - Release 2.4
Retrieve Condition
Retrieve Condition
The following shows how to retrieve the current condition of a facility.
RTRV-COND-T3:tid:aid:ctag::[typereq];
RTRV-COND-T1:tid:aid:ctag::[typereq];
RTRV-COND-E1:tid:aid:ctag::[typereq];
RTRV-COND-EQPT:tid:aid:ctag::[typereq];
RTRV-COND-ENV:tid:aid:ctag::[typereq];
RTRV-COND-ALL:tid:ALL:ctag::[typereq];
Example Command
Retrieve T3 facility
RTRV-COND-T3:tid::ctag;
Retrieve E1 facility 5 RTRV-COND-E1:tid:E1-05:ctag;
Retrieve T1 facility 3
RTRV-COND-T1:tid:DS1-03:ctag;
Retrieve All T1 facilities
Note: Expect a delay while
information is being prepared. RTRV-COND-T1:tid::ctag;
Retrieve EQPT facility
RTRV-COND-EQPT:tid::ctag;
Retrieve ENV facility RTRV-COND-ENV:tid::ctag;
Retrieve ALL facilities
Note: expect a delay while
information is being prepared.
RTRV-COND-ALL:tid::ctag;
Facility AID
EQPT ALL
ENV ALL
T3 DS3-A, DS3-B, or ALL
T1 DS1-1 to DS1-28, or ALL
E1 E1-01 to E1-27, or ALL (see T3-E1 Configuration AIDs on page 8 )
ALL ALL
Keyword Description
typereq Type of condition or state to be retrieved (optional). If omitted, the value
defaults to
ALL . To retrieve specific condition type values, see Alarm and
Event Message Parameters on page 43 .