Carrier Access Wide Bank 28 DS3 Overview Download Page 29

Page: 29 / 50

Wide Bank 28 DS3 - Release 2.4

T1/E1 Protection and Revertive Configuration

T1/E1 Equipment Status Values

Equipment

Status

Description

DS1/E1 Card

Active

DS1/E1 card is installed and active, but individual DS1/E1
circuits may have failed and be on Spare card

Not Present

DS1/E1 card is not installed

MSO Active

DS1/E1 MSO card (relay and electronics) is installed and
active, but individual DS1/E1 circuits may have failed and
be on Spare card

MSO Relay Only
Active on Spare

DS1/E1 MSO relay card is installed, but electronics card is
missing. Circuits have been switched to Spare card.

MSO Relay Only
Not Active

DS1/E1 MSO relay card is installed, but electronics card is
missing. Circuits have been switched to Spare card.

MSO Relay Only
Conflict On Spare

DS1/E1 MSO relay card is installed, but electronics card is
missing. Multiple MSO card removals prevent switching
circuits to Spare.

MSO Relay Only
Spare Not Present

DS1/E1 MSO relay card is installed, but electronics card is
missing. Circuits cannot be switched because Spare card is
not installed.

Wrong Card for
Mode

System mode is set to DS1 when E1 card is installed, or
vice versa. Status applies to both MSO and non-MSO card
types.

DS1/E1 Card
Spare

Active

DS1/E1 card is installed and active, but individual DS1/E1
circuits may have failed

Not Present

DS1/E1 card is not installed

MSO Active

DS1/E1 MSO card (relay and electronics) is installed and
active, but individual DS1/E1 circuits may have failed

MSO Relay Only
Spare Not Present

DS1/E1 MSO relay card is installed, but electronics card is
missing. Circuits cannot be switched without spare
electronics.

Conflict

Multiple MSO card removals prevent switching circuits to
Spare

Wrong Card for
Mode

System mode is set to DS1 when E1 card is installed, or
vice versa. Status applies to both MSO and non-MSO card
types.

Summary of Contents for Wide Bank 28 DS3



















































Search results

Summary of Contents for Wide Bank 28 DS3

Reviews:

Carrier Access Wide Bank 28 DS3, Overview, Page: 29 / 50

Search results

Summary of Contents for Wide Bank 28 DS3

Reviews: