Carrier Access BROADway System 770-0125-AB Installation Manual Download Page 58

Page: 58 / 96

3-10

BROADway - Release 4.00

Configuration

Logging In With the Web Browser Interface (GUI)

6. If the following message appears when the PC is loading the applet, then click the

Grant

Always

button. This will enable the PC to download the applet certificate from the

BROAD

way

system and the message should not appear next time the applet is started.

7. If the

BROAD

way system to which you logged in is

part of a stacked configuration, you will have the
option of viewing just the one

BROAD

way system

you logged into, or the complete

BROAD

way stack.

Select

Stack View

and click

to see all the

BROAD

way systems connected in a stack to

this one

BROAD

way system you logged into.

Select

Shelf View

and click

to see only

the

BROAD

way system you logged into. The

system will still remain part of the stack; but
you will only be able to configure the one system.

If there are any stacking
problems, you will see
messages that alert you to
any stacking configuration
problems when the GUI
starts. You can correct these
errors by removing the
stacked systems in error, and
then adding them back in.

Summary of Contents for BROADway System 770-0125-AB

































































































Search results

Summary of Contents for BROADway System 770-0125-AB

Reviews:

Brands by name

Popular brands

Carrier Access BROADway System 770-0125-AB, Installation Manual

Search results

Summary of Contents for BROADway System 770-0125-AB

Reviews:

Brands by name

Popular brands