carrello Smart CRL-5504, Instruction Manual

Page: 8 / 18

INSTRUCTION MANUAL
7
To adjust the legrest pull 2 levers which are located on both sides of the legrest, and move
up or down.
The posi�oning angle is 120 degrees
6
ADDJUST THE LEGREST
To release press down on the red bu�on.
To lock the safety harness connect all 4 clips with the main waist belt.
ATTENTION: make sure that each clip has the grapple facing inside the stroller (the grapple
can be seen in the middle part of the clip)
ATTENTION: The first step a�er inser�ng the child into the stroller should be to fasten the
safety harness and make sure that they are well-fi�ng: close to the body but not enough to
constrain the child’s movement.
7
SAFETY HARNESS
For the sake of the environment, a�er discon�nuing the use of the product, please dispose
of it to an appropriate waste facility in accordance with the local law.
In order to fold the stroller use the “one hand folding system” which is located in the middle
of the holding grip (see drawing nr 9 in the “Part” sec�on). Slide the lock (A) to the le� and
while holding it in that posi�on press the bu�on located on the underside (B). When
holding both A and В in the indicated posi�ons, the stroller can be folded. Make sure that
the stroller is locked with the folding hook
WARNING:
Make sure that the folding process is been done in a slow and safe manner.
Otherwise it can result in entrapped, crushed and scissored fingers or the product being
damaged.
8
FOLDING THE STROLLER
ENVIRONMENT
• Clean the stroller with a damp towel in a soap and water solu�on
• Do not use strong chemicals to clean the product
• To avoid fric�on of moving parts, which can damage the stroller, make sure they are
clean. Any remains of sand, dirt or dust might cause them to not work properly
• When the product is not in use, it should be stored in a room free of moisture and away
from extreme temperatures
• If it is necessary to replace individual elements, use original parts or those signed by the
manufacturer
• Frequent use of regula�ng parts leads them to wear out. When the components lose
their proper�es, they should be replaced as soon as possible
CLEANING AND MAINTENANCE