carrello Smart CRL-5504, Instruction Manual

Page: 7 / 18

INSTRUCTION MANUAL
6
A. To unfold the stroller firstly release the folding hook. Put the stroller on a flat surface so
that the guardrail, and handle grip are parallel to the ground. Take out the wheels which are
located in the stroller’s basket, before unfolding
B. Hold the handlebar and pull upwards
C. While pulling make sure to hold the handle grip firmly, so that the stroller won't fall. When
the stroller is fully in the unfolded posi�on a clicking sound should be heard indica�ng that
the locking mechanism is working WARNING: Do not use the stroller unless you checked if it
is fully open and that the locking mechanism is working correctly
1
UNFOLDING THE STROLLER
The wheels are divided into front and rear (see Fig. A, B).
Insert the wheels into the holes provided for this. A clicking sound will mean that the
wheels are connected to the frame of the stroller.
WARNING: make sure that the wheels are well seated in the guides, and that nothing
interferes with their movement.
WARNING:
make sure that the wheels are stable before using the stroller
2
WHEELS
1. A�ach the guardrail by holding it on both sides and inser�ng it into the housing hole. A
click should be heard indica�ng the guardrail is locked into place WARNING: use only the
original guardrail or a replacement signified bythe manufacturer as other guardrails might
not be compa�ble with the housing holes therefor they may offer no protec�on
2. Detach the guardrail by pressing simultaneously the bu�ons on the side of the guardrail
and gently pulling it out of the housing holes
3
GUARDRAIL
To engage the brakes, apply downward pressure to the outside part of brake pedal. Once
you hear a clicking sound it means that the brakes are ac�ve.
To release the brakes simply apply downward pressure to the inner side of the pedal
4
BRAKES
To change the backrest posi�on press the recline clip; pull the belt for upright posi�on, or
allow the backrest to decent for more horizontal posi�on.
The backrest recline clip allows you to adjust to any angle possible within a range of 80
degrees
5
ADD JUST THE BACKREST