CARRE PENTASEM Series, Assembly & Use Instructions, Page: 37 / 44

36
NOTE: The pre-start function also works with speed simulation.
B.11 Selecting the units / ‘Pitch’ for the % dose
In the SETTINGS screen, select ‘1 Operator Config’ then ‘3. Adapt’.
Figure 23
If the console is configured for two products, first select the product with the
LEFT/RIGHT arrows (fig. 23).
Use the UP/DOWN arrows to select the parameter.
Use the LEFT/RIGHT arrows to select the units (kg/ha or seeds/m
2
).
Use the LEFT/RIGHT arrows to adjust the “pitch”, or enter the value with the
numeric keypad and press CONFIRM to confirm.
C. RECORDING DATA AND MODULATING DOSES
The data recording and dose modulation functions are available via the SETTINGS
screen.
1. Press to select the recording screen (fig. 24).
The console then detects the presence of a memory card.
2. Press the START button to go to the 'Start task' page (fig. 25).
Figure 24
There are several functions possible. Only functions 1, 2 and 3 can be used with
Artémis.
Figure 25
Functions that can
be used with
Artémis