CARRE PENTASEM Series, Assembly & Use Instructions, Page: 15 / 44

14
5.5.4 Flow test
Determining the setting value
For a correct adjustment, it must be determined whether you are dealing with a common
seed or fine seeds.
-
Common seed: between 4 and 10 mm
- Fine seed: between 1.5 and 4 mm
Following the handling instructions in the order listed and the adjustment table in order
to control the flow. Use the microdosage for sowing fine seeds and small quantities.
Distri blower details
1- Case
2- Graduation sector
3- Inverter
4- Drain trapdoor
5- Threaded rod
6- Microdosage sprocket
7- Gear reducer
8- Elbow
9- Spring clamp for the blower air adjustment flap
Table of settings
The values shown in this table of settings are provided solely for the purposes of
information, as the specific weight and the calibre of the seed are often very different. The
correct value is determined by carrying out a flow inspection at a fixed station. The volume
determined as such will always correspond the the seed flow (for the same seed).
1
2
3
4
5
6 9
8
7