Owner’s Manual |
R829
17
Carmanah Technologies Corp. Copyright © 2006
Document number: MAN_ROAD_R829 Owner's Manual 37234_vC
Last revised: November 7, 2006
Uploading your New Calendar
1. Open the Switch Box and flip the switch to the “Manual Override” position. You will notice
that the lights begin flashing immediately. This is normal because it tells you the School
Zone Beacon is functional. The lights will always flash when the switch is in the OVERRIDE
position.
2. Have a look at the LED on the end of the Interface Box – it should be glowing green. This
tells you that the Interface Box and School Zone Beacon recognize each other and are ready
to communicate. If the LED is not on, check the configuration of the Interface Box using the
Interface Installation and Configuration instructions.
3. Navigate to the Communicate Menu and click on the Send Calendar menu item. Wait for the
calendar to be sent.
4. Flip the switch in the pole-mounted box back to the “Auto” position.
Note: Don’t forget to do this, or your Beacon will flash continuously until the batteries are
dead – it will NOT follow the times loaded in the calendar.
Your School Zone Beacon is now in service.
Note: If you have any problems or questions during the set-up of your new School Zone Beacon,
visit the FAQ and Troubleshooting section of the Help File located on the CD.
Figure 1. Pole mounted box with manual override switch.
Summary of Contents for R829
Page 2: ......
