Owner’s Manual |
R829
29
Carmanah Technologies Corp. Copyright © 2006
Document number: MAN_ROAD_R829 Owner's Manual 37234_vC
Last revised: November 7, 2006
1.5 Sending a Calendar to the School Zone Beacon
Once the calendar is setup as you wish, follow the instructions below to load the newly
programmed calendar to the school zone beacon:
5. Open the Switch Box (see above) and flip the switch to the “Manual Override” position.
You will notice that the lights begin flashing immediately. This is normal because it tells
you the School Zone Beacon is functional. The lights will always flash when the switch
is in the OVERRIDE position.
6. Have a look at the LED on the end of the Interface Box – it should be glowing green.
This tells you that the Interface Box and School Zone Beacon recognize each other and
are ready to communicate. If the LED is not on, check the configuration of the Interface
Box using the Interface Installation and Configuration instructions.
7. Navigate to the Communicate Menu and click on the Send Calendar menu item. Wait
for the calendar to be sent. Please be patient while the calendar is being sent. The
amount of progress that has been made in sending the calendar is reflected by the
progress bar.
Summary of Contents for R829
Page 2: ......
