P a g e |
5
1 Customer information
1.1 Dear customer
The VS+ system is designed to be easy to operate. However, we would ask you to take the time to read these
operating instructions carefully before using the system, and to keep the manual with the instrument at all times.
For any feedback or comments, or if there are questions about the VS+ system which are beyond the scope of this
manual, contact the product support department at Carlson, or your local Carlson representative.
Alternatively, for information on your local Carlson Software-approved service centre, visit our website at
www.carlsonsw.com.
To ensure best service, please make a note of the serial number. This can be found on a label on the instrument.
1.2 User manual
It is important that you read this manual carefully before using the instrument.
There are two manuals available with the VS+ system:
1. This VS+ hardware manual which describes the VS+ probe and all accessories supplied with a standard
system;
2. A
Carlson Scan
software and operations manual;
It is essential that the accompanying
Carlson Scan
software and operations manual is also read and understood.
As well as describing the software, that manual gives a brief overview of a typical deployment. Some troubleshooting
guidelines are also offered which address the most common problems and questions that arise from users of the
VS+.
This manual has been compiled with care. However, should you discover any errors, we would be grateful if you
could contact Carlson directly.
Reproduction in whole or in part, including utilisation in machines capable of reproduction or retrieval, without the
express written permission of Carlson is prohibited. Reverse engineering is also prohibited.
The information in this document is subject to change without notice.
